How to maintain a zipper that has not been used for a long time? Zipper is an opening and closing device that we often use, commonly found in clothing, shoes, bags and other items. However, due to various reasons, sometimes we have some zippers that have not been used for a long time. So, how should you maintain a zipper that has not been used for a long time?
The first step should be cleaning. Use a soft brush or towel to clean dust and stains from the zipper. You can use some mild soapy water to wipe down the zipper, but be careful not to over-soak the zipper. At the same time, avoid using strong acid and alkaline cleaners to avoid damaging the coating on the zipper surface.
Secondly, in order to prevent the zipper from rusting, you can use some anti-rust agents for maintenance. Spray an appropriate amount of anti-rust agent on the sliding part of the zipper, and then slowly move the zipper several times to allow the anti-rust agent to evenly coat the surface of the zipper. However, it is important to choose the appropriate rust inhibitor to avoid damage to the material.
In addition, we can also take some measures to protect zippers that are not used for a long time. For example, use foam or soft cloth to cover the sides of the zipper to prevent dust and moisture. At the same time, you can also use a sealed bag to put the zipper in, and then seal the bag to avoid corrosion of the zipper by moisture in the air. This can effectively extend the service life of the zipper.
In addition, if the surface of the zipper is rusted or discolored, you can use some tips to repair it. You can use some homemade cleaners at home, such as lemon juice mixed with salt, or diluted vinegar and water, to wipe the surface of the zipper to remove rust and discoloration. But it should be noted that the pH of the detergent should not be too high to avoid damage to the zipper. If the surface condition is serious, consider calling a professional to handle it.
Finally, when using a zipper that has not been used for a long time, be careful to handle it gently and avoid pulling hard to prevent the zipper from sliding smoothly or detaching. Especially before the first use, you can move the zipper back and forth several times to allow the lubricant to fully coat the surface of the zipper to prevent the zipper from getting stuck. At the same time, aging zippers must be replaced in time to ensure safety and comfort.
To sum up, zippers that have not been used for a long time need to be properly maintained to extend their service life.